Phytoplankton composition and spatial distribution of copper and zinc in the Fal Estuary (Cornwall,UK)

In the estuaries near Falmouth (Cornwall, UK) levels of dissolved copper and zinc are high, due to drainage of copper and tin mines. Phytoplankton species composition in the autumn of 1989 deviated in the metal-contaminated Restronguet Creek from that in other estuarine branches,viz. Fal, Tresillian and Percuil. In the riverine part of Restronguet Creek (Carnon River)Euglena mutabilis, known as an acidophilic (pH 3) metal-resistant flagellate, occurred at micromolar Cu and Zn, whereas in the clean riversChlamydomonas sp. andOocystis sp. occurred at nanomolar Cu and Zn. An ordination analysis revealed the following patterns in Cu, Zn and phytoplankton species composition in the poly- and euhaline waters. Seston-bound Zn and dissolved Zn were in equilibrium,Katodinium rotundatum is Zn-tolerant, andSkeletonema costatum occurred in water with high contents of Cu in seston. However, none of the variables in these patterns correlated at a significant level (p>0.05). The results show that algae-metal interactions are complicated, and that statistical correlations foundin situ need experimental verification.Communication no. 542 of the Delta Institute for Hydrobiological Research.     

Partitioning of knee joint internal forces in gait is dictated by the knee adduction angle and not by the knee adduction moment

Medial knee osteoarthritis is a debilitating disease. Surgical and conservative interventions are performed to manage its progression via reduction of load on the medial compartment or equivalently its surrogate measure, the external adduction moment. However, some studies have questioned a correlation between the medial load and adduction moment. Using a musculoskeletal model of the lower extremity driven by kinematics–kinetics of asymptomatic subjects at gait midstance, we aim here to quantify the relative effects of changes in the knee adduction angle versus changes in the adduction moment on the joint response and medial/lateral load partitioning. The reference adduction rotation of 1.6° is altered by ±1.5° to 3.1° and 0.1° or the knee reference adduction moment of 17 N m is varied by ±50% to 25.5 N m and 8.5 N m. Quadriceps, hamstrings and tibiofemoral contact forces substantially increased as adduction angle dropped and diminished as it increased. The medial/lateral ratio of contact forces slightly altered by changes in the adduction moment but a larger adduction rotation hugely increased this ratio from 8.8 to a 90 while in contrast a smaller adduction rotation yielded a more uniform distribution. If the aim in an intervention is to diminish the medial contact force and medial/lateral load ratio, a drop of 1.5° in adduction angle is much more effective (causing respectively 12% and 80% decreases) than a reduction of 50% in the adduction moment (causing respectively 4% and 13% decreases). Substantial role of changes in adduction angle is due to the associated alterations in joint nonlinear passive resistance. These findings explain the poor correlation between knee adduction moment and tibiofemoral compartment loading during gait suggesting that the internal load partitioning is dictated by the joint adduction angle.     

A neutron activation technique for manganese measurements in humans

Manganese (Mn) is an essential element for humans, animals, and plants and is required for growth, development, and maintenance of health. Studies show that Mn metabolism is similar to that of iron, therefore, increased Mn levels in humans could interfere with the absorption of dietary iron leading to anemia. Also, excess exposure to Mn dust, leads to nervous system disorders similar to Parkinson's disease. Higher exposure to Mn is essentially related to industrial pollution. Thus, there is a benefit in developing a clean non-invasive technique for monitoring such increased levels of Mn in order to understand the risk of disease and development of appropriate treatments.To this end, the feasibility of Mn measurements with their minimum detection limits (MDL) has been reported earlier from the McMaster group. This work presents improvement to Mn assessment using an upgraded system and optimized times of irradiation and counting for induced gamma activity of Mn. The technique utilizes the high proton current Tandetron accelerator producing neutrons via the ⁷Li(p,n)⁷Be reaction at McMaster University and an array of nine NaI (Tl) detectors in a 4π geometry for delayed counting of gamma rays. The neutron irradiation of a set of phantoms was performed with protocols having different proton energy, current and time of irradiation. The improved MDLs estimated using the upgraded set up and constrained timings are reported as 0.67 μgMn/gCa for 2.3 MeV protons and 0.71 μgMn/gCa for 2.0 MeV protons. These are a factor of about 2.3 times better than previous measurements done at McMaster University using the in vivo set-up. Also, because of lower dose-equivalent and a relatively close MDL, the combination of: 2.0 MeV; 300 μA; 3 min protocol is recommended as compared to 2.3 MeV; 400 μA; 45 s protocol for further measurements of Mn in vivo.     

Change of liver metabolism of 1,2-dibromoethane during simultaneous treatment with carbon tetrachloride

The combination of carbon tetrachloride (CCl₄) and 1,2-dibromoethane (DBE) in isolated rat hepatocytes led to a significant potentiation of both lipid peroxidation and of plasma membrane damage observed after a single treatment with CCl₄. Such a synergistic effect appeared to be related to the CCl₄-induced shift of DBE metabolism from the cytosolic conjugation with glutathione towards the microsomal transformation into toxic intermediates. In fact, CCl₄ significantly inactivated hepatocyte total GSH-transferase, i.e. the DBE detoxification pathway. Furthermore, while the microsomal metabolism of CCl₄ was not affected by the simultaneous presence of DBE, the amount of DBE reactive metabolities covalently bound to hepatocyte protein was significantly enhanced in the presence of CCl₄.     

Direct observation of toxic effects of cyanobacterial extracellular products on Daphnia

The filtrate from a suspension of the cyanobacterium Anabaena minutissima var. attenuata depressed thoracic limb beat frequency of Daphnia carinata by 38–45% in a food-free medium. Repeated exposure to the filtrate produced a similar depression of activity with full or neary full recovery. Response time to the filtrate was 5–8 min and recovery time was 8–12 min. The dose effect on limb beat frequency was continuous, linear, correlated with increased concentration and with no threshold. There was no relationship between body length and limb beat frequency.The interaction between toxicity and food concentration was tested using the diatom Cyclotella suspended in Anabaena filtrate. Daphnia limb beat frequency was depressed by 62%.     

Expression of manganese superoxide dismutase is not altered in transgenic mice with elevated level of copper-zinc superoxide dismutase

In evaluating the relative expression of copper-zinc and manganese superoxide dismutase (CuZnSOD and MnSOD) in vivo in states like Down syndrome in which one dismutase is present at increased levels, we measured activities of both enzymes, in tissues of control and transgenic mice constitutively expressing increased levels of CuZnSOD, during exposure to normal and elevated oxygen tensions. Using SOD gel electrophoresis assay, CuZnSOD and MnSOD activities of brain, lung, heart, kidney, and liver from mice exposed to either normal (21%) or elevated (>99% oxygen, 630 torr) oxygen tensions for 120 h were compared. Whereas CuZnSOD activity was elevated in tissues of transgenic relative to control mice under both normoxic or hyperoxic conditions, MnSOD activities in organs of transgenic mice were remarkably similar to those of controls under both conditions. To confirm the accuracy of this method in quantitating MnSOD relative to CuZnSOD expression, two other methods were utilized. In lung, which is the organ exposed to the highest oxygen tension during ambient hyperoxia, a sensitive, specific ELISA for MnSOD was used. Again, MnSOD protein was not different in transgenic relative to control mice during exposure to air or hyperoxia. In addition, lung MnSOD protein was not changed significantly by exposure to hyperoxia in either group. In kidney, a mitochondrion-rich organ, SOD assay, before and after inactivation of CuZnSOD with diethyldithiocarbamate, was used. MnSOD activity was not different in organs from air-exposed transgenic relative to control mice. The data indicated that expression of MnSOD in vivo was not affected by overexpression of the CuZnSOD and, therefore, the two enzymes are probably regulated independently.     

Biomechanical modeling of deep squatting: Effects of the interface contact between posterior thigh and shank

Epidemiological studies indicate that occupational activities that require extended deep knee flexion or kneeling are associated with a higher prevalence of knee osteoarthritis. In many sport activities, such as a catcher in a baseball or a softball game, athletes have to make repetitive deep squatting motions, which have been associated with the development of osteochondritis dissecans. Excessive deep knee flexion postures may cause excessive loading in the knee joint. In deep knee flexion postures, the posterior aspect of the shank will contact the posterior thigh, resulting in a compressive force within the soft tissues. The current study was aimed at analyzing the effects of the posterior thigh/shank contact on the joint loading during deep knee flexion in a natural knee. An existing, whole body model with detailed anatomical components of the knee (AnyBody) has been adopted and modified for this study. The effects of the posterior thigh/shank contact were evaluated by comparing the results of the inverse dynamic analysis for two scenarios: with and without the posterior thigh/shank contact force. Our results showed that, in a deep squatting posture (knee flexion 120+ degrees), the posterior thigh/shank contact helps reduce the patellofemoral (PF) and tibiofemoral (TF) normal contact forces by 42% and 57%, respectively.     

Les synoviorthèses radio-isotopiques : synthèse des indications et des différents résultats rapportés dans la littérature

Radiosynoviorthesis is used for the local treatment of recurrent joint effusions and leads to synovial pannus necrosis after radionuclide administration. This procedure provides the opportunity to full recovery of normal synovium function after local corticosteroids and systemic modifying drugs failure.     

Bone remodelling around the tibia due to total ankle replacement: effects of implant material and implant–bone interfacial conditions

Abstract

One of the major causes of implant loosening is due to excessive bone resorption surrounding the implant due to bone remodelling. The objective of the study is to investigate the effects of implant material and implant–bone interface conditions on bone remodelling around tibia bone due to total ankle replacement. Finite element models of intact and implanted ankles were developed using CT scan data sets. Bone remodelling algorithm was used in combination with FE analysis to predict the bone density changes around the ankle joint. Dorsiflexion, neutral, and plantar flexion positions were considered, along with muscle force and ligaments. Implant–bone interfacial conditions were assumed as debonded and bonded to represent non-osseointegration and fully osseointegration at the porous coated surface of the implant. To investigate the effect of implant material, three finite element models having different material combinations of the implant were developed. For model 1, tibial and talar components were made of Co–Cr–Mo, and meniscal bearing was made of UHMWPE. For model 2, tibial and talar components were made of ceramic and meniscal bearing was made of UHMWPE. For model 3, tibial and talar components were made of ceramic and meniscal bearing was made of CFR-PEEK. Changes in implant material showed no significant changes in bone density due to bone remodelling. Therefore, ceramic appears to be a viable alternative to metal and CFR-PEEK can be used in place of UHMWPE. This study also indicates that proper bonding between implant and bone is essential for long-term survival of the prosthetic components.     

Comparisons of deterrency and toxicity of selected secondary plant compounds to an oligophagous and a polyphagous acridid

A comparison was made of the relationship between deterrence and toxicity of eight secondary compounds to two acridids. The grass specialist Locusta migratoria was compared with the polyphagous Schistocerca gregaria. L. migratoria was deterred by all compounds presented at natural concentrations to which S. gregaria showed a variety of behavioral responses. Overall, L. migratoria was significantly more susceptible to toxic effects of the chemicals when injected into the hemolymph than was S. gregaria and was more sensitive behaviourally to them. There was a significant correlation in both species between deterrency and toxicity of injected compounds, but little evidence of a relationship between deterrency and oral toxicity.

---

Résumé La comparaison a porté sur les relations entre répulsion et toxicité de huit substances secondaires chez deux acridiens: Locusta migratoria, spécialiste de graminées, et Schistocerca gregaria, polyphage. L. migratoria est repoussé par toutes les substances proposées, aux concentrations naturelles, pour lesquelles S. gregaria a présenté des comportements trés divers. Mais surtout, L. migratoria a été significativement plus sensible que S. gregaria aux effets toxiques de ces substances quand elles sont injectées dans son haemolymphe; S. gregaria a réagi à ces substances plus par des modifications de son comportement. Il y a une corrélation significative pour les deux espèces, entre la répulsion et la toxicité des substances injectées.